Hollow Wall Slab Formwork for Concrete Shuttering Building Construction Instead Plywood

Basic Info.

Product Description

Specification

Product Description

General Operation And Notes Of Instrument For Plastic formwork shuttering :

• Method of use as well as wooden formwork, plastic formwork reinforcement direction with batten direction placed in cross shaped.
• No need to smear the mold release agent before using formworks.
• When cast-in-place the flat plate, spacing between the keels should be 20 ~ 25 cm, and the spacing between the wall plate and keels hould be 10 ~ 20 cm.BEIZHU GROUP pp formwork no need releasing agent lightweight concrete panels best formwork as world.
• The seam-line between plastic formwork should be taped.
• The length of nail should not be too long, generally about 30 ~ 35 mm.
• The strength to drive nailsshould be moderate.
• When removing the formwork, please start from the small part of one end, the support and the plates should be removed at the same time aiming at preventing the template widespread drops, don't let the corner drop on the ground vertically.
• The plastic formwork accesses to be mixed used with wood veneer, bamboo veneer and other material plate.